Tel:
Mobile: +86 13246711160
Email: sales@anbicon.com
Pin material: Brass
Plastic material: PA6T
Withstand voltage: AC 500V/min
Contact resistance: 20 milliohm Max
Insulation resistance: 1000 MΩ Min
Working temperature: -40°C to 105°C
Pin connector Pin Header, one type of connector. This kind of connector is widely used in PCB circuit boards in electronics, electrical appliances and meters. Its function is to act as a bridge between blocked circuits or isolated circuits, and to take on the task of current or signal transmission. It is usually used together with row mother to form plate-to-plate connection. Or is matched with an electronic wire harness terminal to form board-to-board connection; It can also be used independently for board-to-board connection.
Since the specifications required by different products are not the same, there are also many types and specifications of pin connectors. According to the standard classification of pin connectors in the electronic industry, the pin connectors can be roughly divided in o eight categories: 0.8mm, 1.0mm, 1.27mm, 2.0mm, 2.5mm, 2.54mm, 3.96mm and 5.08mm according to the spacing. According to the number of rows, there are single row of needles, double row of needles, three rows of needles, four rows of needles, etc. According to the packaging rules, there are SMT (horizontal paste/vertical paste), DIP (direct insrt/bent insrt), etc. According to the installation mode: 180, 90, SMT Number of needles: 2P to 100P
Pin: straight leg, bent leg, SMT;
Pin material: brass or phosphor bronze;
Insulator materials: plastic PA66, PA46, PBT, PA6T, PA9T, PPS, LCP, etc.
Surface treatment: gold plating (0.8u ",1u", 3u ",5u", etc.), tin plating, semi-gold fog tin, semi-gold bright tin. Packing: PE bag, roll bag, tube pack.
Product Name | Pitch 1.0 Pin Header, single row , Positive and negative feet ,SMT ,High temperature resistance tape&reel with cap PA9T/LCP |
Pitch | 2.54 mm,1.0mm,1.27mm,1.27*2.54mm,1.0mm ,0.8*1.2mm,3.96mm,5.08mm,3.0mm2.5mm |
Detail | 2.54mm pitch special Pin Header connector straight/right angle/SMT |
Housing | PA9T/LCP+30%G.F UL94V-0 |
Number of Pin | 2~40pin |
Insulator Height for Choice | 1.5mm ,1.7mm ,2.0mm ,2.5mm, 4.3mm, 5.0mm, 7.4mm |
Brand Name | anbicon |
Contact Material | Brass |
Insulator Material | PBT ,PA6T ,PA9T ,LCP ,PA66 ,PA46 ,PPS ,PA115(Halogen Free) |
Rating Current | 2.0AMP |
Contact Resistance | 20mΩ Max |
Withstanding Voltage | AC 500V/Minute |
Insulating Resistance | 1000MΩ Min |
Temperture Range | -40°C to +105°C |
Plating | Gold(Au) or Tin(Sn) plated over Nickel(Ni) |
Packaging | PE Bag,Tube,Tape&Reel,Tube+CAP,Tray,Plastic Box |
-
Pitch 1.0mm Pin Header Connector , single row , Right Angle, High temperature resistance glad plating
-
Pitch 1.0mm Pin Header Connector , single row , straight , High temperature resistance 1-50P PE bag
-
Pitch 1.0mm Pin Header Connector ,Double Row , Straight , High temperature resistance 2p-50p
-
Pitch 1.0 Pin Header Connector, double row , SMT ,High temperature resistance PA6T/PA9T/LCP Board to board connector
-
Pitch 1.0 Pin Header, single row , Positive and negative feet ,SMT ,High temperature resistance tape&reel with cap PA9T/LCP
-
Straight Pitch 1.0mm Pin Header Connector double row ,single/ double plastic